CAN FORMING SECTION:
Forming the Can
Paperboard is fed into the machine in reel format. The body material formed on mandrels and side sealed.
Sterilizing the Can
A precise amount of peroxide steam is sprayed into the can and dried by hot air. The sterilized cans are transferred to the stage of product filling.
Closing the Can
After the can is filled, it is closed by joining heat sealing. The seal is heated with hot air and pressed closed in the sealing unit.
Attaching the lid
The lid material with the closure mechanism in reel form, is fed into the die-cutting device. The lid is joined to the body, the surface of the seal is heated with hot air then pressed and closed in the sealing unit. The can is then forwarded into the filling section.
Filling the Can
The filling of the can takes place simultaneously in all six lanes in the filling unit through the open bottom of the can. The filling of the can is carried out by using electromagnetic flowmeters to control the filling volumes.